Best 3D Printers Under $500

Finding a 3D printer for under $1,000 might seem a challenge, but there are actually several worthwhile 3D Printers currently on the market that cost $500 or less.

If you’re on a budget but want to get into 3D printing, these models give a lot of “bang” for your buck.

We’ve tested, vetted and verified three of the top models on the market under the $500 mark to help ensure that you’re able to make the right decision for your specific needs.


Best 3D Printer Under $500
XYZprinting da Vinci 1.0 ($499)

Overview
The winner of our comparison is the da Vinci 1.0 from XYZprinting, hands down. Priced at $499.99, it just slides in under the $500 mark. However, the fact that it’s a fully assembled printer rather than a DIY kit is a mark in its favor. The enclosed printing area is another feature we loved.

Technical Specifications

  • Resolution: 0.1 mm to 0.4 mm
  • Cube print area: 200 mm
  • Weight: 52 lbs.
  • 468 x 510 x 558 mm

Pros

A decent sized printing area is one reason for the high ranking, but the small footprint means it can be mounted almost anywhere. It’s also fully assembled. The high print quality is another factor.

Cons

Some users have to modify existing STL files, and the documentation out of the box isn’t great (but there’s online documentation to supplement).

What Amazon Customers Say…

From Michael del Pozzo:

I’ve had the Da Vinci 1.0 for about 2 weeks now and I’m happy to report that it’s still printing perfectly. One thing I really like about this printer is that the build platform comes pre-calibrated out of the box and I haven’t had the need to calibrate it myself yet.

From Ed Stamm:

My XYZ 1.0 printer was plug and play out of the box. I use it for prototyping ABS parts, and it has way more than paid for itself. In the month or so I’ve been using it, I’ve received an error (32 I think) twice, which required a simple extruder cleaning to remedy. The software is simple to learn but lean on options. My expectations have been exceeded for a printer at this price point.

GET THIS 3D PRINTER


Runner Up
Printrbot Simple Maker Edition Kit ($349)

Overview
Priced at $349, the Printrbot Simple Maker Edition Kit takes second place in our comparison. It’s pretty powerful, relatively simple to use, and offers advantages over other options on the market, but it’s also geared more for beginners.

Technical Specifications

  • Resolution: 0.1 mm and higher
  • Volume: 150 mm cube
  • Weight: 16 lbs.
  • Dimensions: 14 x 10 x 16 inches

Pros

The minimalistic design is elegant, and the machine itself is simple enough for most beginners to use without a problem.

Cons

It only supports PLA filament, so ABS is out of the question. There’s not much documentation out of the box.

What Amazon Customers Say…

From Walsh:

The concept is great. Instead of using “fancy” bearing mounts, they hold the linear bearings in laser cut rectangles with tie wraps. I couldn’t believe it at first, but it works really well. I’m sure if this was a production unit running 8 hours a day the tie wraps would loosen up, but for me running a few minutes a day (if I’m lucky) then it works fine. I wanted an introduction to 3D printing, not an industrial quality machine.

From Cranes:

Pretty small print area, which isn’t too much of a problem if you’re creative. Other than that great printer. Love it.

GET THIS 3D PRINTER


Honorable Mention:
3D Stuffmaker 3D Printer Kit ($495)

Overview
Coming in third, the 3D Stuffmaker – Classic Prusa 3D Printer Kit merits an honorable mention for several reasons.

Its minimal design is easy on the eyes, and it comes in just under our target of $500 (it’s currently priced at $495 on Amazon).

However, this is a kit, not a preassembled printer, so be prepared for some assembly.

Technical Specifications

  • Print Area: 200 x 200 x 100 mm
  • Operating System: Windows and Linux/Mac
  • Print Volume: 3 liters
  • Layer Thickness: 0.1 mm

Pros

One of the best things about this 3D printer, other than the price, is its small size. It fits pretty much anywhere, and it offers a decent printing bed size.

Cons

There are several cons to the 3D Stuffmaker – Classic Prusa 3D Printer Kit, including the fact that it doesn’t come with a power supply (purchased separately). It’s also not that beginner friendly.

What Amazon Customers Say…

From Thomas Burbridge:

Not for the beginner! If you are new to 3D Printers - don’t buy a kit. I bought the kit this summer with the intention for use in my classroom. The printer itself is solid and parts are molded rather than 3D printed. However, the operation instructions are unclear and troubleshooting the system is best done with a screwdriver and quick access to Google.

“Amazon Customer”:

The kit went together well. The printed instructions were great up to 90% complete and then left out a few steps. I recommend printing out a picture of the final assembly to keep from putting assemblies on backwards as I did several times. The most difficult part is getting all of the dimension adjustments just right, but everything eventually fit together perfectly, with a little friendly persuasion.

GET THIS 3D PRINTER


There you have it – the three best 3D printers under $500. With options like these, it’s a cinch to find the perfect model for your budget.

For a list of more 3D printers at various price ranges, check out our big list of the best printers.

Leave a Reply

Your email address will not be published. Required fields are marked *