Best DIY 3D Printers

DIY 3D PrinterWith the wide range of 3D printers on the market, it can be tough for you to tell which one is right for your individual needs.

You’ll find a wide selection of preassembled 3D printers on the market, but there are also quite a few DIY 3D printer kits.

Buying your 3D printer in kit form lets you save a lot of cash, and it puts you in total control of the ultimate product. Of course, if you’re not sure which DIY printer to pick up, things can still be pretty confusing.

Below, you’ll find a selection of the best DIY 3D printers on the market today.

Printrbot Simple Maker Edition Kit ($349)

Priced at just $349 on Amazon, the Printrbot Simple Maker Edition Kit is one of the most popular DIY printers on the market for a number of different reasons. It might look barebones, but it’s big on performance.

Technical Specifications

  • Resolution: 0.1 mm and higher
  • Volume: 150 mm cube
  • Weight: 16 lbs.
  • Dimensions: 14 x 10 x 16 inches


The Printrbot Simple Maker Edition Kit is simple to build and there are instructional videos online. It’s also one of the top-rated starter kits for those just beginning in 3D printing. The minimalistic design is also appealing.


While there are instructional videos available, the printer comes with little documentation. It’s also pretty basic, so some users will outgrow it over time. Finally, it only supports PLA filament.

What Amazon Customers Say…

From Jeff Dubrule:

Moderately easy to assemble. Comes with everything you need to get printing quickly except a PC/Mac. Supports model loaded onto a micro-SD card, so you can kick it off, then disconnect your laptop so it doesn’t tie it up.

From Jill Anne:

All parts organized neatly into bags with a paper checklist. Even came with some filament and I didn’t even see that in the features. Just like I was hoping, the printer runs on an even 12v 6A, perfect for wiring right to a car battery if you use a solar system for power. I try to use only DC and avoid inverters and AC power altogether! I was a little worried I didn’t have the Allen-keys but they even included them too, along with laser-cut wooden wrenches! Awesome!


RepRap Prusa Mendel Iteration 2 ($599)

The RepRap Prusa Mendel Iteration 2 Complete 3D Printer Kit is another very affordable model, with a price tag of just $599 on Amazon. It’s a bit larger than the Printrbot Simple Maker Edition Kit, although the industrial design is just as minimal. With a print area of 7 x 7 x 5 inches, it has a greater capacity than the previously mentioned printer.

Technical Specifications

  • Print area: 7 x 7 x 5
  • Print height: 0.1 mm to 0.3 mm
  • Accuracy: 0.01 mm to 0.02 mm
  • Weight: 22 lbs.
  • Uses: PLA or ABS
  • Maximum size: 180 x 180 x 125 mm


There’s an extensive video series compiled by the manufacturer dedicated to assembly and operation (25 parts). You’ll also find customer service available through the manufacturer’s website and by phone/email.


Some customers will need to download USB drivers from the NWRepRap site. The software isn’t as refined as some users may prefer. Bed levelling can take some time.

What Amazon Customers Say…

Theodore Miller:

I ordered this kit directly from NWReprap and received a very well packed shipment in a short time. Complete video and illustrated instructions are available on-line and almost MUST be followed realtime while assembling the kit. A number of improvements that have been made in the design throw a curve since the videos and instructions are behind reality but reference to the RepRap forums plus a little common sense will pull you through the rough spots.

John Storlie:

I purchased a kit from and shipping was fast. The website contains COMPLETE assembly videos that detail all aspects of assembly and calibration. When I had a problem with calibration, I was able to call their phone number and the guy that recorded the videos was available to walk me through the process.


Velleman K8200 3D Printer Kit ($699)

For $699, you get one of the best entry-level printer kits on the market. With the K8200 you get a little bit bigger print size than the RepRap model listed above (about 8″ cube), and it has a maximum print resolution of 200 microns.

Technical Specifications

  • Resolution: 200 microns
  • Volume: 20cm x 20cm x 20cm (8″ cube)
  • Weight: 20 lbs.
  • Dimensions: 19.7 x 16.5 x 24.4 inches


Less expensive than some DIY printers, this open-source solution can actually print its own replacement parts. It’s also relatively easy to assemble.


The print speed is a little slow compared to some models, and the documentation for setup and use could be better.

What Amazon Customers Say…

From Stephen A Steiner:

If you are wanting to get into the world of 3D printing, this is an excellent choice. It’s based off of the VERY popular RepRap design and Velleman took it a few steps further. With that said, this is a kit in the purest sense of the word.

From Peter Schuft:

I love this printer, but if you are expecting something that is plug and play, you will be disappointed. Once built, I have had a lot of success with the printer. The build was intense and took me two days. The instructions were clear and there were lots of good pictures. Lots of experimenting required to get successful prints, but if you do not give up, you will be very impressed with the quality.


While these models are three of the best DIY 3D printers on the market, you’ll find quite a few others out there well worth considering.

For a list of more 3D printers at various price ranges, check out this guide.

Leave a Reply

Your email address will not be published. Required fields are marked *